Rifle

Home/Shop/Rifle
  • The Shotgun Boogie Black Lever Hook Replacement Button instead of the hook on the Uberti 1873 receiver, behind the lever.

    Boogie Hints: The Shotgun Boogie Lever Hook Replacement Button is held by a nut, instead of a tiny pin and can be dropped in.
  • Out of the box 1895 Marlins are pretty stiff to cycle. With this kit the action is smooth. Trigger pull will be reduced too. The kit comes with two hammer springs. The soft one for Federal primers, the stronger one for all other primers. The washer is coming at first on the hammer strut, then the spring. This avoids that the hammer spring will be touching the hammer. Because of the variations in manufacturers tolerances, I simply cannot guarantee that my parts will function perfectly without being fitted by a competent gunsmith. I recommend that you employ the services of a gunsmith who is familiar with both these firearms and my kits. Of course, I developed these kits, and am glad to guarantee the work, if I fit them.
  • New and improved carrier arm and lever springs for the 1860, 1866 and 1873 Uberti rifles. The original springs press on the cams of the carrier arm and lever with far too much force. As a result, the cams of the carrier arm and lever are destroyed piece by piece. This no longer happens with these tuning springs. The set includes two high-quality screws with Torx 8 heads. The blocks are interchangable, one spring for right side, the other one for left side. No punch or squeeze needed anymore to keep the springs in the block. Because of the variations in manufacturers tolerances, I simply cannot guarantee that my parts will function perfectly without being fitted by a competent gunsmith. I recommend that you employ the services of a gunsmith who is familiar with both these firearms and my kits. Of course, I developed these kits, and am glad to guarantee the work, if I fit them.  
  • The extractor is oversize and need to be fit in. SBGW Extractor Small Because of the variations in manufacturers tolerances, I simply cannot guarantee that my parts will function perfectly without being fitted by a competent gunsmith. I recommend that you employ the services of a gunsmith who is familiar with both these firearms and my kits. Of course, I developed these kits, and am glad to guarantee the work, if I fit them.
  • Marlin 1895 tuning kit with one piece firing pin. Smoother action, reduced trigger pull. Only for target shooting, not for hunting and not for self defence! I recommend installation by an experienced gunsmith.
  • Hard anodized aluminum carrier for small caliber (.357mag/.38spec) for 1873 and 1866 Uberti rifles. The weight of this aluminum carrier is only a quarter of the brass carrier weight.
  • Set of 4 different springs for the Uberti rifle mod 1873 and 1866 SBGW hammer coil spring system: 9 lbs 11 lbs 13 lbs 15 lbs
  • This bead can be replaced or changed on the SBGW Front Sight for the Uberti 1873 rifle. Available in brass or stainless steel. Available diameters of the brass beads:
    • 4.0mm / .157"
    • 4.5mm / .177"
    • 5.0mm / .195"
    • 5.5mm / .216"
    Available diameters of the stainless steel beads:
    • 5.0mm / .195"
    • 6.0mm / .236"
    • 7.0mm / .275"

    Choose Your Options Below:

  • New SBGW front sights for the 1873 Uberti.

    Available in 11mm / .43" and 13mm / .51" high. Additionally you can choose between different materials and sizes of the beads. The beads are secured by a set screw from the front. The bead can easily be locked and opened with an 1.5mm allen wrench. One set includes the following parts: Sight (.43" or .51" high), one bead of your choice, two set screws, and an allen wrench. Diameters of the brass beads are:
    • 4.0mm / .157"
    • 4.5mm / .177"
    • 5.0mm / .195"
    • 5.5mm / .216"
    Diameters of the stainless steel beads are:
    • 5.0mm / .195"
    • 6.0mm / .236"
    • 7.0mm / .275"

    Choose Your Options Below:

  • The Shotgun Boogie Gun Works 66 style loading gate for the 1873 Uberti rifles, solves some hick-up problems and makes loading easier. The color is metallic steel silver. The new Shotgun Boogie Gun Works 66 style loading gate is adjusted for the heavier weight of the 45LC and 44-40 rounds.

    "W" and "H" serial numbers only!

    Because of the variations in manufacturers tolerances, I simply cannot guarantee that my parts will function perfectly without being fitted by a competent gunsmith. I recommend that you employ the services of a gunsmith who is familiar with both these firearms and my kits. Of course, I developed these kits, and am glad to guarantee the work, if I fit them. Boogie Hints: I recommend fixing the loading gate with a center punch, then it can't move, even when the screw is loose. For the best result use together with the Shotgun Boogie Gun Works magazine spring. We do our best to produce the loading gates as drop-in. Sometimes frames and sideplates are different and the loading gates need to be fit in, for properly working condition. A gunsmith is recommended to fit the loading gate in.
    • New small Uberti bolt in 357/38 with SBGW coils spring extractor. Modified for SSKs.
    • No replaceable tab.
  • This drop-in-kit is coming with 4 different springs to cover all kind of primers and an metric allen wrench for the set screw.

    • Hammer coil spring system for 1873 and 1866 Uberti lever action rifles.
    • The kit can be used in a 1873 Uberti rifle with original Uberti trigger.
    • But the best performance you get together with SBGW trigger kit.
    • In a 1866 Uberti rifle the original trigger need to be used.
    • In the case when using the original Uberti trigger, the set screw is to adjust the trigger.

    See also the articles in Cowboy Chronicle:

    October 2016 from Larsen E. Pettifogger, pages 48-55: https://www.sassnet.com/Downloads/16eChron/16octchron.pdf January 2015 from Larsen E. Pettifogger, page 36-45: https://www.sassnet.com/Downloads/15eChron/15janchron.pdf
  • The original Magazine Tube System invented by Shotgun Boogie.

    • The Uberti 1873 rifles use the same diameter for all magazine tubes, 45, 44-40 as well as .357/.38.
    • The magazine tube system gets the 38 rounds from a zig-zag into a straight line, and lets them come out of the magazine more straight into the carrier.
    • This magazine tube system is available for 20 inch barrel length.
    • Aluminum tube is hard anodized.
    • Magazin spring and follower are stainless steel

    While this kit is easily installed, it is not drop-in ready and requires fitting by a competent Gunsmith.

  • The extractor is oversize and need to be fit in. SBGW Extractor Small  
  • Trigger #1 for Uberti mod 1873 rifle

    Shotgun Boogie Gun Works adjustable trigger kit for competition rifles, model Uberti '73.

    Includes allen wrench, trigger, sear, trigger spring, washer between trigger spring and screw, screws and safety bar spring. While this kit is easily installed, it is not drop-in, it requires fitting by a competent Gunsmith. And most important: The position of the trigger IS NOT ADJUSTABLE!  See also the articles in Cowboy Chronicle: January 2015 from Larsen E. Pettifogger, page 36-45: https://www.sassnet.com/Downloads/15eChron/15janchron.pdf October 2016 from Larsen E. Pettifogger, pages 48-55: https://www.sassnet.com/Downloads/16eChron/16octchron.pdf Because of the variations in manufacturers tolerances, I simply cannot guarantee that my parts will function perfectly without being fitted by a competent gunsmith. I recommend that you employ the services of a gunsmith who is familiar with both these firearms and my kits. Of course, I developed these kits, and am glad to guarantee the work, if I fit them.