-
The Shotgun Boogie Gun Works 66 style loading gate for the 1873 Uberti rifles, solves some hick-up problems and makes loading easier. The color is metallic steel silver. The new Shotgun Boogie Gun Works 66 style loading gate is adjusted for the heavier weight of the 45LC and 44-40 rounds.
"W" and "H" serial numbers only!
Boogie Hints: I recommend fixing the loading gate with a center punch, then it can't move, even when the screw is loose. For the best result use together with the Shotgun Boogie Gun Works magazine spring. We do our best to produce the loading gates as drop-in. Sometimes frames and sideplates are different and the loading gates need to be fit in, for properly working condition. A gunsmith is recommended to fit the loading gate in. -
12GA, metal parts top condition, some storing dents on forend stock, rear stock is new, chambers beveled, front sight, mechanical trigger, opening angle extended, short stroked, lever to left and up, $2560.00 incl. shipping, plus 10.25 tax when gun will be shipped to an FFL inside California.
Please email us at for information on purchasing this firearm.
-
1873 Uberti, .357/.38, 18" octagonal barrel, pistol grip, amazing color case, wood checkered, nice grain in the wood, full Shotgun Boogie tuning, short stroke kit, #2 trigger, coil spring hammer system, leather wrap on lever, 66 style loading gate, magazine alu liner hard anodized, smokestack magazine plug, 4.5mm brass front sight, $2890.00 incl. shipping, plus 10.25 tax inside California. Gun must be shipped to an FFL.
Please email us at for information on purchasing this firearm.
-
Kit includes hammer spring, trigger spring, firing pin spring, latch spring, pawl spring and hammer plunger spring.
-
- New small Uberti bolt in 357/38 with SBGW coils spring extractor. Modified for SSKs.
- No replaceable tab.
-
Weaker stainless steel Magazine Tuning Spring.
-
This drop-in-kit is coming with 4 different springs to cover all kind of primers and an metric allen wrench for the set screw.
- Hammer coil spring system for 1873 and 1866 Uberti lever action rifles.
- The kit can be used in a 1873 Uberti rifle with original Uberti trigger.
- But the best performance you get together with SBGW trigger kit.
- In a 1866 Uberti rifle the original trigger need to be used.
- In the case when using the original Uberti trigger, the set screw is to adjust the trigger.
See also the articles in Cowboy Chronicle:
October 2016 from Larsen E. Pettifogger, pages 48-55: https://www.sassnet.com/Downloads/16eChron/16octchron.pdf January 2015 from Larsen E. Pettifogger, page 36-45: https://www.sassnet.com/Downloads/15eChron/15janchron.pdf -
Super Sight Box with:
- one 0.43 inch sight high
- one 0.51 inch sight high
- 4.0 mm / .157"
- 4.5 mm / .177"
- 5.0 mm / .196"
- 5.5 mm / .216"
- 5.0 mm / .196"
- 6.0 mm / .236"
- 7.0 mm / .275"
- 7.5 mm / .295"
- 8.0 mm / .315"
-
No tools needed anymore to open the front plug screw of Uberti 1866 and 1873 magazine tubes. The rubber ring takes care, that it can't loosen by itself, but easily to open by hand. Made out of brass.
-
The original Magazine Tube System invented by Shotgun Boogie.
- The Uberti 1873 rifles use the same diameter for all magazine tubes, 45, 44-40 as well as .357/.38.
- The magazine tube system gets the 38 rounds from a zig-zag into a straight line, and lets them come out of the magazine more straight into the carrier.
- This magazine tube system is available for 20 inch barrel length.
- Aluminum tube is hard anodized.
- Magazin spring and follower are stainless steel
While this kit is easily installed, it is not drop-in ready and requires fitting by a competent Gunsmith.
-
The extractor is oversize and need to be fit in.
-
SBGW tuning spring kit for lever, hammers and both sears
-
New #1 Trigger for Uberti mod 1873 rifle
Shotgun Boogie Gun Works adjustable trigger kit for competition rifles, model Uberti '73.
Includes trigger, trigger spring, washer for the trigger spring, screws, pin and safety bar spring. While this kit is easily installed, it is not drop-in, it requires fitting by a competent Gunsmith. See also the articles in Cowboy Chronicle: January 2015 from Larsen E. Pettifogger, page 36-45: https://www.sassnet.com/Downloads/15eChron/15janchron.pdf October 2016 from Larsen E. Pettifogger, pages 48-55: https://www.sassnet.com/Downloads/16eChron/16octchron.pdf -
- This 4.5 mm / .177" diameter is a medium brass bead I offer
- It can be replaced or changed on the SBGW front sight for the Uberti 1873 rifle.